Serving Bethlehem, Otumoetai, Matua, Brookfield, Judea, Greerton & surrounds
Answer 2 quick questions and we'll send you a ceramic coating quote for your car.
Mitch is a certified Feynlab installer applying Feynlab coatings that lock out UV, water, bird droppings and road grime for years. Done at your place across Tauranga, or we collect the car and return it coated. Quote back within the hour.
"Mitch did a fantastic job on our caravan, polishing it and applying a ceramic protective coating to get it looking showroom new again His attention to"
Dennis Harris
"Mitch came to our home and did a great job on our two vehicles. Both inside and outside immaculate. Great communication, turned up when he said he w"
Christine Jones
"Mitch does a wonderful job, we have tried a lot of the valets round Tauranga until finding Mitch 3years ago and have never been disappointed. He is ow"
Susanna
Tauranga's salt air, harsh UV, and the regular dust off the Tauriko industrial corridor do real damage to clear coat over time. Swirl marks appear. Paint oxidises. What was once a sharp finish starts looking washed out. That damage is permanent without intervention.
Ceramic coating bonds chemically to your clear coat and creates a hard, hydrophobic layer that repels water, contaminants, bird droppings and UV. It is not a spray wax that washes off in a fortnight. It is a lasting protective layer that holds up across years of Tauranga weather and weekly driving.
There is a practical reason most people book this service: resale value. A car with protected, maintained paint commands a noticeably higher price. Ceramic coating is one of the few car care investments that you can genuinely recover when it comes time to sell or trade in.
Get a Free Quote NowBefore-and-after examples of the standard we work to on every job.
Choose the level of protection that's right for your vehicle.
The anchor
Most cars end up here
The ceiling
The Beading Guarantee
If water stops beading on your paint inside five years, we strip it back and re-coat the car free. You keep every maintenance visit either way.
Nobody spending this kind of money on paint protection can tell whether the job was done properly. Not at handover, not in six months. This is the answer to that.
You can check it yourself. Ten seconds with a hose. A guarantee you can verify beats one you have to take on faith.
The annual maintenance visit is what keeps the coating beading, and it is the condition that keeps the guarantee live.
It brings the car back to Mitch every year, so you are never guessing whether the coating is still doing its job.
Fill in the form with your vehicle type and suburb. Mitch reviews every enquiry personally and gets back to you within the hour with a clear outline of what is recommended for your car and why.
Under 60 seconds to submitBefore any coating goes on, the paint has to be completely clean. Mitch carries out a full hand wash, iron fallout removal and clay bar decontamination to strip bonded road grime, brake dust and industrial fallout off the surface. Coating over contamination is a shortcut Mitch does not take.
60 to 90 minutesSwirl marks, fine scratches and oxidisation show through a ceramic coating if they are not addressed first. Depending on your chosen tier, Mitch uses a machine polisher to level the clear coat and restore genuine gloss before any coating is applied.
1 to 4 hours depending on paint conditionThe ceramic coating is applied panel by panel using professional-grade applicators. Each section is worked in and levelled carefully before moving on. This is not something you rush. The coating needs to be spread evenly across every surface for a consistent result.
2 to 3 hoursAfter application, the coating is left to flash off and begin its initial cure. During this window the vehicle cannot get wet or be touched. Mitch times this carefully around weather conditions, which is especially relevant during Tauranga's changeable spring weather.
30 to 60 minutes on-site flash timeMitch does a full walkround under different light angles to check for any high spots or missed areas before he packs up. You get a clear rundown of what to avoid in the first 7 days and how to maintain the coating long term so you actually get the full lifespan out of it.
15 to 20 minutes
